Shop for Best Marine High Volume Water System with Accumulator kit,Best Marine High Volume Water System with Accumulator kit Wholesaler,Various Diaphragm Pump

The water Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch and check valve, and supplies smooth flow from tricke to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.

Water Booster System Features:

Integrated pump and accumulator tank system

Compact design installs easily in convenient locations

Available in 12v.24v.115v and 230v models to service the RV, Bus Conversion and Commercial Coach Markers etc..

Can run dry without harm

FDA materials in pump and accumulator tank for drinking water

Self-priming up to 6ft.(2m)

Includes assorted ports for easy installation

Install a water strainer to protect pump for debris.

Technical Data:

Model	Voltage(DC/AC)	Flow rate(LPM/GPM)	Pressure(PSI/Bar)	Amps	Check Valve	Packing Size(MM)	N.W./G.W.(KGS)
FL-35H	12V DC	25.0/6.6	35/2.4	7.8	EPDM	510510400	11.68/13.68
FL-34H	24V DC	25.0/6.6	35/2.4	4.0	EPDM	510510400	11.68/13.68
FL-33H	115V AC	25.0/6.6	35/2.4	1.0	EPDM	510510400	12.0/14.30
FL-32H	230V AC	25.0/6.6	35/2.4	0.8	EPDM	510510400	12.0/14.30
FL-40H	12V DC	34.0/9.0	40/2.8	12	EPDM	510510400	11.68/13.68
FL-44H	24V DC	34.0/9.0	40/2.8	5.0	EPDM	510510400	11.68/13.68
FL-41H	115V AC	34.0/9.0	40/2.8	1.0	EPDM	510510400	12.0/14.30
FL-43H	230V AC	34.0/9.0	40/2.8	0.8	EPDM	510510400	12.0/14.30